Prototyping 101 Pack
The Prototyping 101 Pack is the companion to our Circuits from Scratch Workshop. It gives you everything you need to make your first circuits as an industrial or product designer.
LOOMIA Prototyping 101 Packs include…
Single Backlit Button: The single backlit button is a simple mechanical switch that comes with an LED inside. When you press the button, the circuit is completed, driving your pin high or low. Use the embedded LED to make a glowing power icon, logo , or whatever you desire.
Single Pressure Sensor : The mini single pressure sensor gives you an analog read that maps to force on the sensor. The more you press, the lower the resistance goes, perfect for on-body pressure related sensing like ribcage expansion for breathing. This sensor is small but mighty, making it convenient for small surface area applications.
5V-7.2V Heater: This heater made to work with an off-the-shelf, 5V battery pack or two lipo batteries (be sure both can output 2A safely). The heater will get hotter depending on the voltage you use. The heater warms up quickly with tangible heat within 60 seconds and top heat after 2 min. Use this component for heating devices, or for thermochromic effects.
LOOMIA Prototyping 101 Packs each include:
Arduino Uno
Alligator Clips
Jumper wire
Resistor set
Breadboard
Mosfet
2x 3.7V Lipo batteries
3.7V lipo battery charger
Thermochromic paper
1x LOOMIA Simple Pressure Sensor
1x LOOMIA Backlit UI Button
1x LOOMIA heater